Silica gel triangular Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple silica-gel box with embedded mesh to place at the bottom of my filament box without loosing space.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 64
- Wydruki
- 2
- Wyświetlenia
- 627
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Simple silica-gel box with embedded mesh to place at the bottom of my filament box without loosing space.
Two versions: L140mm and L60mm
Only one lid needed by box but you could use 2 for horizontal levelled positioning.
Print instructions
Category: Containers Summary
Simple silica-gel box with embedded mesh to place at the bottom of my filament box without loosing space.
Two versions: L140mm and L60mm
Only one lid needed by box but you could use 2 for horizontal levelled positioning.
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes
</div>Notes:
Print with window down to embed a mesh, or as-is if you plan to add the mesh after (with tape, or ironing, ...)
If print as-is you may use supports depending of your printer's bridging capability.