[WIP] Longer Orange 10 - 120mm Fan Conversion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Not Satisfied with another adapter found on Thingiverse, I decided to make my own. !!!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 34
- Makes
- 0
- Views
- 600
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Not Satisfied with another adapter found on Thingiverse, I decided to make my own.
!!! Design and instruction are still a work in progress. At this point I printed one set of v0 and it is waiting for time to be tested !!!
Goal:
- Replace the ultra noisy 60mm OEM Longer Orange-10 Fan.
- Use a standard 120mm CPU fan laying around my spare parts.
- Keep the original metallic bottom plate.
- Minimize or avoid any additional screw / reuse screw from OEM bottom.
- Make it customizable with optional side-panels.
Print instructions
Category: 3D Printer Parts Summary
Not Satisfied with another adapter found on Thingiverse, I decided to make my own.
!!! Design and instruction are still a work in progress. At this point I printed one set of v0 and it is waiting for time to be tested !!!
Goal:
- Replace the ultra noisy 60mm OEM Longer Orange-10 Fan.
- Use a standard 120mm CPU fan laying around my spare parts.
- Keep the original metallic bottom plate.
- Minimize or avoid any additional screw / reuse screw from OEM bottom.
- Make it customizable with optional side-panels.
Post-Printing
Assembly
The Funnel-Top is used to maintain the cable and to be installed in place of the original fan.
The Bottom-adapter goes on the bottom of the printer and is fixed to the metallic plate using the 4x M3 L8 screws taken from the original rubber feet fixation.
WARNING
Replacing a small, noisy, and high flow fan by a bigger fan allow to have more choice of quite fan but every 120mm CPU fan will not be suitable. Take care to choose a fan that have enough air flow to match the OEM one (wich is a noname, no-spec, chineese one...)
Be careful to the working temperature of your printer BEFORE and AFTER the conversion.