Water Pump Mount. Camper.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a counter top mount to allow a water jug pump to be counter-mounted instead of placing it on top of the jug.
- Rating
- 5 / 5
- Likes
- 38
- Downloads
- 145
- Makes
- 1
- Views
- 1,137
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This is a counter top mount to allow a water jug pump to be counter-mounted instead of placing it on top of the water jug. This works great for camper vans that want the battery powered water pump, but want it attached to the countertop.
This is designed for the pump in the picture but it should fit most pumps that will attach to a water bottle.
There is a groove running around the mount about 1/3 of the way from the top. This was so that if the fit was too loose you are able to put an o-ring in there to snug it up. It's already pretty snug with my faucet pump so I don't need an o-ring.
Drill the hole in the countertop for the water line. Screw or glue the mount to the counter. Press fit the faucet onto the mount.
Also included is a 2" taller mount.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20-30%
Filament: Any PETG
Notes:
I used PETG but PLA and ABS should be fine.
Category: Kitchen & Dining