Asus Prime X670-P vertical M.2 Key E bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Asus PRIME X670-P requires a special mounting bracket to vertically mount a WiFi card. While the manual states…
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 470
- Makes
- 2
- Views
- 5,365
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
The Asus PRIME X670-P requires a special mounting bracket to vertically mount a WiFi card. While the manual states "The M.2 Wi-Fi module and vertical M.2 Key E bracket set are purchased separately.", it can (currently) not be purchased.
To mount a Intel AX210 (without an additional PCIe adapter card), a simple bracket was designed. It requires:
- Intel AX210 (or similar sized card - like the AC 7265 in the pictures)
- 2x MHF4-to-RP-SMA pigtail
- 2x M2.5x6 screws (to attach the bracket to the mainboard)
- 1x M2.5x8 screw (to attach the M.2 card to the bracket)
- 3x M2.5 nuts
The easiest way to install the card is to perform following steps while the mainboard is not yet installed in a case:
- put M2.5x6 screws through the lower mounting holes
- attach 2x MHF4-to-RP-SMA pigtail to the sidewall (including nuts)
- put M2.5x8 screw through the top hole
- put Intel AX210 between top screw and the mounting bracket and fixate it using one M2.5 nut
- put bracket with AX210 in the right place on the mainboard and attach M2.5 nuts on the mounting screws
- attach pigtails to MHF4 socket
- put mainboard in case
- attach antennas
There is also a version without (RP-)SMA mounting sidewall - which was not used at the end but might still be useful for some persons.
Print Settings
Printer:
QIDI X-Max
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
15%
Filament:
PolyMaker PolyLite PLAblack
Category: Computer