1 / 1
CR-10 Smart Pro Raspberry Pi 4b Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A quick mount to allow you to mount a raspberry pi 4 b and buck-boost converter in place of the wifi box.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 41
- Makes
- 0
- Views
- 482
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
As said before, This mounts a RPI 4b and converter in place of the wifi box for a CR-10 Smart Pro. I converted to Klipper. It's not perfect but it was good enough for me. Side Note.. you'll have to cut the end off of a USB cable and replace it was a 2.56 4pin JST plug if using the original MCU. The buck-boost convertor is set to 5.1 volts and wired directly to the original PSU.
I use brass thread inserts for most of my files.