EVA 2.4 Hotend Mount Standard MK8 Hotend
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hi this is a Hotend Mount for the Eva 2.4 Toolhead system. I did improved it for the Mercury one ZeroG project.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 208
- Makes
- 0
- Views
- 1,227
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Hi this is a modifyed version of the MK8 Hotend Mod. This mod sets the Hotend higher for better Cooling duct support on the Eva 2.4, heatset inserts instead of nuts and gives the opportunity to use more standard parts from the original ender 5.
I did remove the mounts for bl-touch/cr-touch or probes. It will work best with the klicky-mod from @Turtlecrawler [2.1.49 2.1.81] and is way more cheaper than a bl-touch/cr-touch.
Also i did modify the ziptie holder its now 1.2mm thicker.
The rest of the eva 2.4 parts can be downloaded from the ZeroG website.
The hotend shown is the supported one color may be different. The microswiss mk8 hotend is not supported!
Print with organic/tree supports
Version 6 at the moment….