Chain guide adapter for YT Jeffsy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to mount a "Funn Zippa Lite MTB Chain Guide" to a first gen YT Jeffsy.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 47
- Makes
- 0
- Views
- 773
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Adapter to mount a "Funn Zippa Lite MTB Chain Guide" to a first gen YT Jeffsy. The chain guard is the E-type/S3 type.
The rear bolt goes straight through to the frame, so the 3D printed adapter is not entirely relied on for strength. It's extremely strong and stiff. This is not a true E-type adapter, it sits quite a bit lower. I'm using a 30T chainring, and I have the chain guide near the 36T position. I doubt a 32T chainring would fit with this design.
You need an M5x25 socket head cap screw, and an M5x12 socket head cap screw.
Link to the chain guide: https://www.amazon.com/dp/B01N7ETE4D/ref=cm_sw_r_tw_dp_x_SPBtFbGSKPY7H
Print Settings
Resolution:
0.2
Infill:
100%
Filament:
MakeShaper ABS
Notes:
I printed it solid with ABS. But it probably works with anything above 30% infill. PETG would also work.
Category: Sport & Outdoors