1 / 2
Ratrig Foot
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model increases the distance from the V-Core 3.1 by an additional 80cm so that a cleaning robot can fit underneath.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 35
- Makes
- 0
- Views
- 449
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
- Remove feet with Joining Plate for 3030 - 90 Degree (preferably each foot separately).
- Reuse M5 and M6 screws and insert a M5 Hex Locking Nut through the largest hole in the intended stall.
- Fix the Rubber foot with metal insert with M5 screw from the other side (fix it with a blunt object if it sits not tight enough).
- Joining Plate for 3030 - 90 Degree place on the 3D print M6 Cap head Screw through the holes and fix from the opposite side with a M6 drop In T-slot
- Attach to the ratchet and repeat for all other feet.
Information: make sure your 3D printer prints as accurately as possible because I didn't leave much wiggle room with the M5 Hex Locking Nut.