Volcano in four colors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Volcano model colored and sliced into five pieces to replace the cardboard pieces in the kids "Dinosaur Escape Game".
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 35
- Makes
- 0
- Views
- 461
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I needed a volcano that could be printed in five slices to replace cardboard pieces to the kids, "Dinosaur Escape Game". This model served as the basis for that game piece.
I stretched the model taller, used Meshmixer to color lava, vegetation, rock and chard rock. Sliced off the bottom 10~15% to eliminate overhang, sliced into five pieces, and added holes for magnets. Each piece needs to be < 27mm tall to fit nicely in the original game box.
Printer: Bambu Lab (BL) X1C with AMS
Filament: PLA in Grey, Green, Red, Black loaded in that order in AMS
Magnets: Six 8x#mm, eight 6x3mm, four 5x3mm. I super glued the magnets into the pieces.
I hid the pegs before printing as I was using magnets, but the 3mf includes the pegs.
I printed in Bambu Lab's Standard mode (.20mm) with a .4mm nozzle. It was a 16+ hour print, but can be shortened with Sport mode.
NOTE: I have included an STL that works in Ocra Slicer and Bambu's slicer. For some reason (likely the coloring) it fails to open in Prusa Slicer.