Volcano in four colors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Volcano model colored and sliced into five pieces to replace the cardboard pieces in the kids "Dinosaur Escape Game".
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 461
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I needed a volcano that could be printed in five slices to replace cardboard pieces to the kids, "Dinosaur Escape Game". This model served as the basis for that game piece.
I stretched the model taller, used Meshmixer to color lava, vegetation, rock and chard rock. Sliced off the bottom 10~15% to eliminate overhang, sliced into five pieces, and added holes for magnets. Each piece needs to be < 27mm tall to fit nicely in the original game box.
Printer: Bambu Lab (BL) X1C with AMS
Filament: PLA in Grey, Green, Red, Black loaded in that order in AMS
Magnets: Six 8x#mm, eight 6x3mm, four 5x3mm. I super glued the magnets into the pieces.
I hid the pegs before printing as I was using magnets, but the 3mf includes the pegs.
I printed in Bambu Lab's Standard mode (.20mm) with a .4mm nozzle. It was a 16+ hour print, but can be shortened with Sport mode.
NOTE: I have included an STL that works in Ocra Slicer and Bambu's slicer. For some reason (likely the coloring) it fails to open in Prusa Slicer.