Creality Flagship K1 Activated Carbon Air Filter Purifier
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed a way to add an activated carbon filter to K1, that was designed for 3D Printing.
- Rating
- 5 / 5
- Likes
- 59
- Downloads
- 341
- Makes
- 2
- Views
- 3,194
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The goal here was to design a way to add an activate carbon filter to K1 exhaust fan. I've researched for an specific filter for this application, and found that Anycubic has one for this specific use. So, it was designed to use this filter.
You can install the box inside or outside. To mount it outside, you will need 2 M3x5mm screws. To install inside you will need 2 screws that are 5mm longer than the original ones.
For using outside you can use any filament. Inside you will need a hi-temp resistant filament.
The filter I've used was this one:
https://www.aliexpress.com/item/1005004490862586.html?spm=a2g0o.order_list.order_list_main.41.3f651802eSIMvS
Be careful manipulating these filters, once they are very sensitive.
Replacing filters every 6 months would be enough.
No Rafts
No Supports
0,4 mm nozzle
0,2mm layer
15% infill
Printed using PETG. For this, I've used 150 mm/s speed on my K1.
If you like my design, please support me hitting “Like”.