7 inch touchscreen holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
touchscreen for 3d printer
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 58
- Makes
- 0
- Views
- 998
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
if using this 7 inch 1024x600 LCD D display with bracket-h Full viewing angle panel at 178 degrees for raspberry PI 3B + 4B
I used a Motedis angled Universal Monitor Mount VESA 75+100 for mounting on my 3060 extrusions on the Ratrig V-Core 3 ThreeFiddy.5
Add m3 heat inserts from the back for the Vesa and to the front for the cover
I added the stp file for the back, so you can add a chamfer for using countersunk bolts for the screen (I drilled them out a tiny bit after printing)
Also added .3mf file combining the angled mount with the backplate printable as one (SuperSlicer) and also an .stl file with even less holes, go bananas !
This is a remodel of my own https://www.printables.com/model/279988-szfydosh-7-pi-touchscreen-3030-case then again not.
I printed it in PETG (.3 layer with .5 nozzle, 3 walls, 30% gyroid infill, no supports)