Stackable Shoe Rack using IKEA BURHULT
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Transform IKEA BURHULT into stackable shoe rack using printed parts. No glue/screws needed for assembly.
- Rating
- 5 / 5
- Likes
- 102
- Downloads
- 435
- Makes
- 1
- Views
- 2,569
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 100% re-model from 3DDIY Stackable Shoe Rack, adapted to fit IKEA BURHULT.
I've included the .stp file, so you can remix it further.
Parts
For assembly you will need:
printed parts
1x IKEA BURHULT
For parts print the following:
2 x Shoe_rack.stl
Print settings:
0.6 mm nozzle
0.4mm Layer height
0 Top layers
0 Bottom layers
8 Perimeters
10% Fill density
Honeycomb Fill pattern
0.65mm Default extrusion width
0.65mm First layer
0.68mm Perimeters
0.68mm External perimeters
1.00mm Infill
Assembly
Slide the printed parts over the ends of the IKEA BURHULT.
It should hold together without the need of glue or screws, but you can always use them later if needed.