1 / 6
IQaudio DAC Pro Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for Raspberry Pi 3 with IQaudio DAC Pro hat, with use of GPIO pins and screw tabs for permanent mounting.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 316
- Makes
- 0
- Views
- 2,059
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
This is remix of Stamos fantastic Hifiberry Case.
The original model was modified as follows
- dimensions were adjusted to IQaudio DAC Pro High-Fidelity-Audio-Output-HAT
- the case was extended in height to allow using the GPIO pins
- a hole for a M12 cable gland was added to feed a data cable into the case towards the GPIO pins, e.g. for connecting I2C modules like an OLED or for switching a relay.
- screw tabs were added to allow wall mounting
The case was designed and tested with a Raspberry Pi 3 Model B.
For the full assembly you need:
- the printed parts
- Raspberry Pi with SD Card and power adapter
- IQaudio DAC Pro
- 4x Nylon spacers (10 mm, M2.5)
- 4x Nylon nuts
- 4x M2.5 with 6 mm length metal screws
- M12 cable gland
The model on the pictures was printed with PLA (Prusament Galaxy Black) with 0.2 mm layer height and 4 perimeters.