PCB Heatbed, 2020 Aluminium profile bracket for Voron trident
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A PCB Heatbed bracket for Voron Trident that should be printed in ABS.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 66
- Makes
- 0
- Views
- 1,137
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
I built a self sourced Voron Trident 250 and instead of using the spec'd AC Aluminium heatbed setup, I use a 250x250 PCB heatbed from Aliexpress. The mounting holes are different so I printed a bracket in ABS to cater for the different hole positions.
I've printed using these bracket with a 100°C bed temperature in an enclosure that reaches ~55°C.
It held up well so far, but I will eventually replace it with a metal bracket when I find one. Until then, I keep spares just in case it fails. I would HIGHLY recommend printing it in ABS or a better heat resistant / rigid material.
Print orientation demonstrated in third picture.
Follow Voron guidelines for slicer settings.