PCB Heatbed, 2020 Aluminium profile bracket for Voron trident
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A PCB Heatbed bracket for Voron Trident that should be printed in ABS.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 1131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I built a self sourced Voron Trident 250 and instead of using the spec'd AC Aluminium heatbed setup, I use a 250x250 PCB heatbed from Aliexpress. The mounting holes are different so I printed a bracket in ABS to cater for the different hole positions.
I've printed using these bracket with a 100°C bed temperature in an enclosure that reaches ~55°C.
It held up well so far, but I will eventually replace it with a metal bracket when I find one. Until then, I keep spares just in case it fails. I would HIGHLY recommend printing it in ABS or a better heat resistant / rigid material.
Print orientation demonstrated in third picture.
Follow Voron guidelines for slicer settings.