1 / 3
Modular Guitar Pedal Board
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Need a board for you guitar pedals? Just print them. These are strong and can hold at least 160lbs on top.
- Rating
- 5 / 5
- Likes
- 88
- Downloads
- 496
- Makes
- 8
- Views
- 3,894
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution
Why purchase an expensive pedal board for $50? You can just print a few of these and connect them together. Each module is around a 6-7 hour print and they're really strong. I was able to jump on these without failure, so they're able to be stomped on to activate pedals. There's a few holes to run cables through and smaller holes to use zip-ties. There are connection points on all 4 sides to connect more modules.
Print Settings:
Module:
- Layer height: 0.25-0.30mm
- Print speed: 60-80mm/s
- Shell count: 2
- Infill: at least 20%
- No raft, no brim
- Support the holes on the side
Hardware:
- Layer Height: 0.16mm
- Print speed: 40mm/s
- Shell count: 3
- Infill: 20-30%
- no raft, brim, or supports
Handle:
- Layer height: 0.25-0.30mm
- Print speed: 60-80mm/s
- Shell count: 2
- Infill: at least 20%
- No raft, no brim, no supports