1 / 3
Ikea Summera Galant keyboard tray brackets (raised 35mm)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace the Ikea Summera Galant keyboard tray brackets and raise height by 35mm
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 23
- Makes
- 1
- Views
- 1,243
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
The Ikea Summera/Galant keyboard tray is a fixed height below the desk of ~95mm. This was too low for our desk when used with a low profile keyboard so I designed these brackets and printed in PETG to raise it by ~35mm.
Install directions:
- Use screwdriver to remove the two plastic bushings from each of the original Ikea brackets
- Soften the outermost bushings with a hair dryer for 15 seconds or cut a slit in them so that they can slide off the rails.
- Slide brackets off the rails. Leave the inner bushings in place
- Slide new bracket followed by the bushing back onto the rails
- Jam the bushings into the bracket
- Install the keyboard tray as normal