Counting matching models…
This is a simple, modular drawer organizer for the Ikea Galant file drawer units. This thing is the 1x2 organizer that is 1/2th the width of the drawer. Print 2 of these to fill one row across the drawer - or mix and match with the 1x1…
This is a simple, modular drawer organizer for the Ikea Galant file drawer units. This thing is the 1x1 organizer that is 1/4th the width of the drawer. Print 4 of these to fill one row across the drawer - or mix and match with the 1x2…
Plug for IKEA Galant desk rods or any equivalent 28mm inner diameter square tube.
Clip on hook size for Ikea desk (mine is a Galant - may fit other models). The hook slides in the gap between the metal frame and the desk surface and clips into place holding it secure. I haven't stress tested it, but it seems solid - I…
Simple rectangle design inspired by rbarbrow's spacer for Grdfinity in the IKEA Alex drawers on Thangs. The Galant 3 drawer unit requires spacers on both the side and back due to the drawer being a non-multiple of 42 in both X and Y axis.…
Glovebox hinge for a 2001 Mitsubishi Galant. It may fit other Mitsubishi models. Print with hook side face down, 100% infill and support on for best results. Holes may need to have a drill run through them for the best fit. Print Settings…
I decided to make a replica of the Galant desk connector from Ikea because in moving I lost the desk originals. On the internet you can find models only for a fee or 3d prints for a fee. I decided to replicate such object hoping it will…
Preview: https://a360.co/32WHK4E
I made low profile versions of drsp123's great model (https://www.printables.com/model/317193-ikea-under-desk-hook-no-screws-required-tested-on-). Also made one to hold my LG screen PSU. There are 3 files: One very low profile one, one…
This is remix of alphajberry's Ikea Galant desk headphone holder. I made the hooks slightly longer to accommodate for a larger headband. Hook now measures 37mm from the stem to hold my Beyerdynamic headphones. Print Settings Printer…
Just another spool holder system. The idea was to hide the spools and the tools can be hold in the drawer. The mmu mode is set to normal, otherwise there can be failed loads sometimes. Material : Ikea Galant, two rods of 30cm and 5m of…
Spacers for top drawer, designed by canomad are available here: [printables](https://www.printables.com/pl/model/712460). Dimensions of the drawer: 462x316 This fits 11 squares vertically without the need of using filler. This fits 7…
This is a simple headphone holder for older Ikea Galant desks. This holder is designed as an insert into the frame. At the bottom is a hole for screwing in a 3,5 x 25 woodscrew to fixate it through the existing hole of the frame (washer…
As I replaced the tabletop of my desk and used all "clips" to install the new tabletop, i couldn't longer mount the cable management net. This mounting system allows you to mount the included cable management net. Also check out the screw…
The design is off centered for the PS5 to sit in-betwee the emptyspace of the foot and the wall (assuming you have a standard size table).
Mitsubishi Galant VR-4 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
A better fitting A4 hanging folder bar bracket for IKEA GALANT file cabinet. I found the original slot was a bit too wide for A4 hanging folders (at least the ones sold in the US).
This is a socket designed for Ikea Galant T-style desk legs so that you can attach them to other desk surfaces. I had a couple Galant legs that I wanted to use with a butcher block to make a custom desk, so I made this model to accomplish…
This is a by-product of an other thing - a mounting system for the included net - which can be found here: https://www.prusaprinters.org/prints/129921-ikea-bekant-galant-desk-cable-management-net-mount This cover does significantly…
I would also add the nTop file to have parametric modelling possible, but that's not allowed to upload here. The base plate is this one: https://makerworld.com/en/models/2459463-gridfinity-ikea-galant-top-drawer#profileId-2700410 courtesy…
The Ikea Summera/Galant keyboard tray is a fixed height below the desk of ~95mm. This was too low for our desk when used with a low profile keyboard so I designed these brackets and printed in PETG to raise it by ~35mm. Install…
This is for transparent sheet with 0.45mm thickness (actual measurement) The table is Galant from Ikea. Because I did'n want to ruin my table I put some silicone feet under the support to keep it “clipped” to the edge of the table Build…
To extend my Ikea desk from the Galant series, I designed a support that can be inserted onto the base and a 16mm thick board can be screwed into it. The screw hole is for a 6mm diameter bolt and requires a nut and washer. It can be…
small hook for the galant tabel from ikea
I have an older Version of an Ikea Galant Rolling Drawer. After moving to an new home I lost the bar that interconnects the diallock with the drawer lock on the side. Ikea kindly sends out spare parts, but the newer revision has some…
Deutsch: Diese Halterung passt an einen IKEA Galant Rollcontainer und dient als Aufnahme für die Stangen des Dokumentenhalters. Druckeinstellungen: PETG, Schichthöhe 0,15 mm, Düse 0,4 mm. Nicht-kommerzielle Nutzung. English: This holder…
This is a socket designed for Ikea Galant T-style desk legs so that you can attach them to other desk surfaces. I had a couple Galant legs that I wanted to use with a butcher block to make a custom desk, so I made this model to accomplish…
This is a mount to attach an IKEA Skådis pegboard to the side of a Galant cabinet. It reuses the existing wood screw from the cabinet to attach the mount, and uses 2x M5x20 button head screws and 2x M5 nuts to attach the pegboard to the…
I printed in 0.03 Draft mode without issues, but you do you. This is a remix of Ferrarius's Cable Hook ( https://www.thingiverse.com/thing:4647774 ). I like this hook a lot and I use it on my Ikea desk but I needed something for the…
Clamp-on “cuff” for mounting accessories, including computer CPU enclosure, utility shelves, Multigrid panels, or other items, to the vertical tubular legs of the IKEA “Galant” desk, and possibly other similar desks/tables with…
Increase the height of your Ikea Galant desk by 20, 30, 40 or 50mm. Printing adjustments - Filament : 0.2mm - Perimeters : 4 - Infill : 20% - Pattern : Cubic This could be way to strong but I wanted to be able to stand on the desk in one…
Compared to the original, I made a more elegant and functional height adjustment screw cap for Ikea Galant desk. There are knurled and smooth versions. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No…
I rearranged my office and needed a filler for the connector holes on my Galant desk. This is where the square support bars fit into the desk to connect either a longer desk segment or the round semi-circle endpiece. Friction fits into…
IKEA Galant desk end cap Print Settings Printer: Voxelab Aquila Rafts: No Supports: No Infill: 20 Filament: PolyTerra PLA Cotton White Category: Office
Made a simple LED strip mount clip for my desk. Reason… Didn't want to screw or tape LED strip to my desk. Yeah, I know, tape would have been faster. It's a ~20yr old Ikea Galant and I got my money's worth already. I get that other people…
Mounts to the mounting point on the IKEA Galant cabinets. Hook for motorcycle helmets etc
Lenovo Thinkpad adapter mount for under an IKEA GALANT desk. Print Settings Printer: Creality CR-6 SE Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20 Filament: SUNLU PLA+ Black Category: Office
Ikea Galant was just a bit too low for me and adjusting the legs a bit higher made the desk a bit unstable, so I opted to create a spacer for the legs. The inner circle is perfectly sized for the Galant's feet.
Print on the flat side. Any filament will work, pictures show Fiberlogy Impact PLA. For better stability, use double-sided tape for the support ‘structure’. If you want to modify it, model is public in OnShape .
I designed these mounts to fit the Keyhole mounting system that is usually found behind multiplugs or small systems that can be installed on the wall. This particular design is meant to be used with IKEA's galant desks; the mount fits in…
Small table to rest a book cover on, for example.
IKEA GALANT shelves have the ideal dimensions for building an enclosure for the Pruse MINI. In addition to the parts provided here, an acrylic sheet should be bought with the following dimensions: Thickness: 5mm Width: 800mm Length: 400mm…
