1 / 5
IKEA GALANT Gridfinity Spacers/ Fillers for lower (Middle, Bottom) Drawers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spacer for IKEA GALANT drawer unit's middle and bottom drawers to fill partial space left with Gridfinity.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 39
- Makes
- 0
- Views
- 473
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
- Spacers for top drawer, designed by canomad are available here: [printables](https://www.printables.com/pl/model/712460).
- Dimensions of the drawer: 462x316
- This fits 11 squares vertically without the need of using filler.
- This fits 7 squares horizontally with presented supports on the right side.
- In my drawer I used Gridfinity Refined Lite Bases https://www.printables.com/pl/model/413761-gridfinity-refined/files. Specifically I used 6x4 + 6x3 + 5x4 + 5x3 bases and connected them together, but they meet the standard so the fillers should fit any other Gridfinity base.
- Height of the spacers: 3mm (you may adjust to your baseplates for better UX)
- You have to print one Filler 1, one Filler 2 and two Filler 3s. (On picture my drawer consists of two different rectangular fillers instead of two 3s, changed the project as they wouldn't fit on the smaller beds)
- One of the curvature radiuses of Filler 1 are not perfectly matching the drawer, nonetheless it still fits pretty nicely. Feel free to mess around with Fusion project in case you wanted to improve it.
- Included both separate STLs for each filler, Autodesk Fusion 360 files as well as Bambu Studio project file.
- Printing:
- Used printer: Bambu Lab A1 Combo
- Nozzle: 0.4 mm Stainless Steel
- Plate: PEI Plate
- Nozzle Temperature: 220 C
- Heated Bed Temperature: 65 C
- Material: Generic Black PLA
- Bambu Studio preset: 0.20 mm Standard @BBL A1
- Print time: 1h
- Used Filament: 33.63 g
- It is my first published project, so I'd appreciate all the suggestions and criticism.