Bambulab P1S Poop Chute
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A “poop chute” with proper form and function.
- Rating
- 4.813 / 5
- Likes
- 229
- Downloads
- 1,794
- Makes
- 17
- Views
- 11,626
- Reviews
- 16
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
After hours of searching, I was not happy with form or function of other available “poop chute” models. The Bambulab printers are beautiful, and I did not want to attach something to it that did not look like it belonged. So, I made the decision that I would design my own that had a better form factor and still functioned properly.
On the Bambulab printers you will have to increase the printable height setting on the printer to 251mm.
This is sized for 3mmx5mm magnets. They can be glued into place with super glue or other similar adhesives
The two dowels on the rear of the model will index on the screws which hold the plastic chute on the back of the printer to position the “poop chute”.