1 / 2
True GDM-10 condenser fan grill spacer for Edgewater replacement motor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spacer to extend the distance between the condenser fan's blades and grille after replacing the condenser fan motor.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 118
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you replace the condenser fan motor on a True commercial cooler (in my case, a GDM-10) with an Edgewater motor, the fan blades will sit just slightly lower than with the original motor, causing them to brush against the grille.
These spacers add 5mm of extra space between the grille and the cooler body, which keeps the blades from hitting it while still keeping the safety of the grille intact. Not a perfect fit but gets the job done.
