Clerty - Engraved Sign (Instead of Embossed/Raised Text)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Text is engraved instead of raised, allowing for filling with Lacquer Paintstik (or other text fill methods)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Printed fine for me but may be errors in the model - just quickly made in PrusaSlicer using new negative volume tools, then exported to STL and ‘auto-repaired’ in Windows 3D Builder.
I've got more experience dealing with filling in of engraved text than coloring of raised text, so I opted to go with what I know. Plus I wanted the ‘DIRTY’ side's font to have more of a ‘dirty’ feel to it compared to the ‘CLEAN’ side's font.
- I personally use a lacquer-based paintstick to fill in the text with decent results. With the raised edge/lip around the text surface plane it is a bit more tricky to do, and my result wasn't as good as previous implementations of this method because of this (but was still very acceptable)
- Pretty simple: rub paintstick in to text to fill, wipe away excess with mineral oil soaked towels/q-tips.
- Here are examples of the product I use (no affiliate links)
There are lots of other methods to fill in text, such as thin oil based paint in a syringe, z-hop infill printing, etc etc.
My Print Settings:
Orientation: Print ‘face down’ (with gears side on build plate)
Layer Height: 0.2mm
First Layer Height: 0.28mm
Nozzle Diameter: 0.6mm (0.4mm also works)
Perimeters: 3
Ironing: ENABLED (PrusaSlicer default sub-settings worked for me, incl. ‘All Top Surfaces’)
Top Solid Infill Pattern / Solid Infill Pattern: Monotonic Lines (not anchored)
Infill: 25%
Infill Pattern: Adaptive Cubic
Supports: Yes (I did just the end of the floating edge where the gear will sit, see image)
Modifiers:
- Height Range Modifier
- Range 6.70mm - 7.08mm
- Layers and Perimeters
- Perimeters: 1
- Leave others as is
- Layers and Perimeters
- Range 6.70mm - 7.08mm
Using this Height Range Modifier (when using the same First Layer& Layer Heights as me) will only use 1 perimeter on the top 2 layers of text.
I like to use 1 perimeter around the surface layer edge of text for a cleaner look. (I don't have much experience ironing - this may be redudant when ironing)