4in Plastic Nose Cone E-Bay for Rockets - Inverted Pursuits Lab
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
4 in Nose Cone Electronics Bay
- Rating
- 4.5 / 5
- Likes
- 16
- Downloads
- 221
- Makes
- 5
- Views
- 877
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
4in Plastic Nose Cone Electronics Bay build
This design is also avaliable for purchase from my webstore: https://inverted-pursuits-lab.square.site/product/4in-plastic-nose-cone-electronics-bay/20?cp=true&sa=true&sbp=false&q=false
Designed to be glues in or screwed in.
In order to screw it in you will need to source 2-56 screws and drill the required holes (typ 1/16in)
Glueing in is as simple as it sounds, add a little epoxy to the nose cone and slide it in. Be sure not to get epoxy on the threads.
Includes:
1 - Threaded Sleeve (Note this does have a top and a bottom)
1 - Threaded Electronics Carrier/Bulkhead
Still needed:
Uses ¼-20 Eye bolt and nut to attach to rocket
If you're interested in helping support us please check out our webstore: https://inverted-pursuits-lab.square.site/