4in Plastic Nose Cone E-Bay for Rockets - Inverted Pursuits Lab
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4 in Nose Cone Electronics Bay
- Ocena
- 4,5 / 5
- Polubienia
- 16
- Pobrania
- 220
- Wydruki
- 5
- Wyświetlenia
- 874
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
4in Plastic Nose Cone Electronics Bay build
This design is also avaliable for purchase from my webstore: https://inverted-pursuits-lab.square.site/product/4in-plastic-nose-cone-electronics-bay/20?cp=true&sa=true&sbp=false&q=false
Designed to be glues in or screwed in.
In order to screw it in you will need to source 2-56 screws and drill the required holes (typ 1/16in)
Glueing in is as simple as it sounds, add a little epoxy to the nose cone and slide it in. Be sure not to get epoxy on the threads.
Includes:
1 - Threaded Sleeve (Note this does have a top and a bottom)
1 - Threaded Electronics Carrier/Bulkhead
Still needed:
Uses ¼-20 Eye bolt and nut to attach to rocket
If you're interested in helping support us please check out our webstore: https://inverted-pursuits-lab.square.site/