Makita Battery holder wall mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€9.08 – €11.10 net (excluding VAT)
For file: makita_akku_halter_bob_02mm_pla_mk3s_10h41m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €10.09 excluding VAT (range midpoint).
- Weight reported by the author
- 114 g
- Print time reported by the author
- 10.68 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Hello, here is my idea of a Makita battery holder.
- Rating
- 4.75 / 5
- Likes
- 194
- Downloads
- 1,649
- Makes
- 16
- Views
- 7,606
- Reviews
- 16
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello,
here is my idea of a Makita battery holder.
I have seen a lot of holders, where the battery is resting on the round shaped area (red marked at the attached picture), but for me it seems that this area is not realy suitable for a proper rest.
So I decided to draw a holder where the battery rests on the much stronger finns (green marked at the attached picture).
The solution works great and the mounting is with a minimum amount of holes in the wall.
But you need at least two holders and the interconnection piece to get a stable mounting ;-)
If there is the need of a single 2 battery holder with two screw holes, please leave a comment, then I will upload a second version.
Print instructions
The holder is printed with the basic 0,2mm quality settings.
The interconnection piece is printed with 30% infill and 3 wall layers.