Fast Spool Winder (and Spools)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This spool winder is connected to a cordless screwdriver and allows fast winding of cords. The spool is parameterizable.
- Rating
- 4 / 5
- Likes
- 98
- Downloads
- 230
- Makes
- 2
- Views
- 1,138
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
With this spool winder you can quickly wind your cords on a spool. Included are a spool and a bit, which are joined together and then connected to a cordless screwdriver.
The use of the spool winder is shown in the following video:
The files include the spool that can be seen in the video. To create spools with other dimensions, you can use the attached Fusion 360 project file. User parameters were used for this, which can be modified in Fusion via Modify ➝ Change Parameters. The following parameters (and default values) are used.
The spool is in two parts and is joined together with a little glue after printing. When winding the spools, note the orientation of the arrows on the spool and the bit. Spool and bit must be put together as shown in the following picture.
My Print Settings
- Printer: Prusa MK4 (0.4 mm nozzle)
- Rafts: No
- Supports: No
- Resolution: 0.2 mm
- Infill: 20 %
- Filament brand: Prusament, Verbatim
- Filament color: Galaxy Silver, Prusa Galaxy Black, White, Red
- Filament material: PLA