Cord storage with blade and mini Bic sleeve
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hold cordage, slice it, and fuse the ends with this simple storage device
- Rating
- 4 / 5
- Likes
- 22
- Downloads
- 61
- Makes
- 1
- Views
- 385
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I wanted an all in one option to store cord, cut it, and fuse the ends. This holds a lot of cordage and uses a standard razor blade set in one side of the holder. The other side of the holder holds a mini bic lighter to fuse the ends after cutting.
The center of the holder has a hole to start winding the cord, just put one end through it and tie a knot and then start winding. You can use the notches on the ends to secure the cord (depending on the diameter). As you can see in the picture, I got standard 550 cord to stay in the biggest one, but it was pretty tight.
One corner also has a a hole for a carabiner to attach it to a pack.
The blade I used was a tight fit, so I used a soldering iron to push it into place so that it is solid. The blade cover snaps in place for me, but a dab of glue would hold it on if the tolerances are different for you.
Feel free to remix!