Cord storage with blade and mini Bic sleeve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hold cordage, slice it, and fuse the ends with this simple storage device
- Ocena
- 4 / 5
- Polubienia
- 22
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 385
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted an all in one option to store cord, cut it, and fuse the ends. This holds a lot of cordage and uses a standard razor blade set in one side of the holder. The other side of the holder holds a mini bic lighter to fuse the ends after cutting.
The center of the holder has a hole to start winding the cord, just put one end through it and tie a knot and then start winding. You can use the notches on the ends to secure the cord (depending on the diameter). As you can see in the picture, I got standard 550 cord to stay in the biggest one, but it was pretty tight.
One corner also has a a hole for a carabiner to attach it to a pack.
The blade I used was a tight fit, so I used a soldering iron to push it into place so that it is solid. The blade cover snaps in place for me, but a dab of glue would hold it on if the tolerances are different for you.
Feel free to remix!