Teltonika TSW210 DIN Rail Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.55 – €1.89 net (excluding VAT)
For file: TSW210 DIN mount v8_0.4n_0.2mm_PETG_MK3S_1h35m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.72 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 1.59 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A DIN rail adapter for the Teltonika TSW210 8-Port Switch. Uses a spring to secure the switch so no tools required
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 56
- Makes
- 0
- Views
- 647
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
A spring securing DIN adapter for the Teltonika TSW210 switch. Uses the standard hardware and mounts over the original backplate.
PETG is recommended as that is what I found to produce the best spring. Print without support.