P
PrintablesDan Foo
Teltonika RUTX mount
Mount for Teltonika RUTX routers e.g RUTX50
- Downloads
- 610
- Likes
- 28
- Rating
- 5
Search results: teltonika
Counting matching models…
P
Printableskonfetti
Wall mount for Teltonika RUTX09, RUTX11, RUTX12 and similar
The wall mount is designed to keep the router securely in place, in my case in a camper van. Compared to the model I remixed this from, this mount uses much less material therefore prints much faster and is designed as a snap-on: a tab…
- Downloads
- 451
- Likes
- 23
- Rating
- 5
P
PrintablesMrNeedlemouse
Teltonika RUT360 wall mount
I found no suitable wall mount for my Teltonika RUT360 so I designed one with some inspiration from others (for other models, RUT240 etc). STEP provided for easy remixing. Screw holes are 5.3mm diameter, 10.5mm counterbore diameter with…
- Downloads
- 252
- Likes
- 3
- Rating
- 0
P
PrintablesThe Restless Maker
Teltonika RUTX50 DIN rail mount
You need to print 2 pieces in order to mount it to the DIN rail clip. I have printed it out of PETG. Screws are ⌀2mm. I like to use it with this DIN rail clip (bit modified version is included in the list):…
- Downloads
- 199
- Likes
- 9
- Rating
- 5
P
Printablescomsoft1908
SIM Card Holder / Tray for Teltonika Router TK240
print in ABS and with FINE settings
- Downloads
- 148
- Likes
- 0
- Rating
- 0
P
PrintablesBart
Teltonika RUT240 wall mount
Reupload of a RUT240 wall mount. Original by ElZek1 , which is a remix of a model by pasen .
- Downloads
- 147
- Likes
- 11
- Rating
- 0
P
PrintablesCrusell
Surface mounting kit for Teltonika routers
The Teltonika Surface Mounting Kit is designed to mount your Teltonika Router or Modem to almost any surface (walls etc.). You need two pieces. You need two M3x5 screws to mount the kit to the router. Compatible with: RUT230 RUT900 RUT240…
- Downloads
- 144
- Likes
- 5
- Rating
- 0
P
PrintablesNaiki
Teltonika RutX11 Router - (Wall) mount - incl. step & F360 File
A simple mount for Teltonika RutX11 router/modem with mounting holes. You have to print: InnerClamp OuterClamp The other two files are for those who want to modify Print Settings Printer: Kingroon KP3S Rafts: No Supports: No Resolution:…
- Downloads
- 125
- Likes
- 5
- Rating
- 0
P
Printablesfprocess
Teltonika RUTX50 Mini Rack 10" 2U mount
Rutx11 Mini Rack I designed a mini rack support for the Teltonika RUTX50. To fit correctly in the mini rack, I designed it to be 2U with a cable outlet. It is printed in PETG, 0.25 Draft, vertical with organic support. It can be printed…
- Downloads
- 88
- Likes
- 11
- Rating
- 0
P
PrintablesDave
Teltonika TRB500 Wall Mount
Simple wall mount for Teltonika TRB500 with screw holes and slots for velcro straps. The design can be found on Onshape, so you can customize it to your needs.
- Downloads
- 81
- Likes
- 3
- Rating
- 0
P
Printablesecnivnl
Teltonika TRB140 wall mount
I’ve created a simple 3D wall mount specifically for the Teltonika TRB140 4G router! It’s designed to keep the router snugly in place on the wall without taking up desk space. The mount is minimalistic but sturdy, perfect for getting the…
- Downloads
- 80
- Likes
- 8
- Rating
- 0
P
PrintablesHannes Westman
Wallmount for Teltonika RUT11
Print with or without supports with material of your choise. This is an easy print.
- Downloads
- 80
- Likes
- 1
- Rating
- 0
P
PrintablesDad
Teltonika RUTX10 Wall Mount Clip
This is a clip to mount a Teltonika RUTX10 router on a wall, backboard, or other surface. Mount with the release tab facing up. PETG recommended for flex and heat resistance. I have not tested it with PLA, but PLA will probably work as…
- Downloads
- 79
- Likes
- 1
- Rating
- 0
P
PrintablesSquirtle
Teltonika RUTM30 DIN rail mount
Teltonika RUTM30 DIN mount for following holder: https://www.printables.com/model/1453174-din-rail-bracket-58mm-heat-insert-screw-version
- Downloads
- 72
- Likes
- 2
- Rating
- 0
P
PrintablesCreepyCarpet
Teltonika TSW210 DIN Rail Adapter
A spring securing DIN adapter for the Teltonika TSW210 switch. Uses the standard hardware and mounts over the original backplate. PETG is recommended as that is what I found to produce the best spring. Print without support.
- Downloads
- 55
- Likes
- 2
- Rating
- 0
P
Printablesfprocess
Teltonika RUTX11 Mini Rack 10" 2U mount
Rutx11 Mini Rack I designed a mini rack support for the Teltonika RUTX11. To fit correctly in the mini rack, I designed it to be 2U with a cable outlet. It is printed in PETG, 0.25 Draft, vertical with organic support. It can be printed…
- Downloads
- 48
- Likes
- 3
- Rating
- 0
P
PrintablesNaiki
Teltonika RutX14 Router - (Wall) mount - incl. step & F360 File
A simple mount for Teltonika RutX14 router/modem with mounting holes. You have to print: InnerClamp OuterClamp The other two files are for those who want to modify Category: Office
- Downloads
- 45
- Likes
- 2
- Rating
- 0
P
Printablesfmarkos
Holder for teltonika-tmt250 GPS tracker
The GPS bounced around in my vehicle, so I made this case to fix it on a vehicle wall. The magnetic charger cable can be connected below. Print instructions You might need support for the top opening.
- Downloads
- 43
- Likes
- 1
- Rating
- 0
P
Printablesmassale
Teltonika RUT241 Flat Mount Bracket with SIM Lock and Antenna Access
This 3D printed bracket is designed to fit the Teltonika RUT241 (also compatible with RUT240). It lets you fix the router firmly onto a flat surface while adding protection and better cable management. 🧩 Features Securely mounts the…
- Downloads
- 31
- Likes
- 2
- Rating
- 0
P
PrintablesHonzik1
Smaller case for Teltonika FMT100
Smaller case for Teltonika FMT100. I used inner threads.
- Downloads
- 14
- Likes
- 2
- Rating
- 0
P
PrintablesOscar
Teltonika FMC650 Wall Support
Remix from Teltonika RUTX50 to FMC650.
- Downloads
- 5
- Likes
- 1
- Rating
- 0
P
PrintablesSkramstad
Teltonika Networks CAP700 Wall mount
A wall mount for Teltonika Networks CAP700. STEP available for making adjustments if needed.
- Downloads
- 1
- Likes
- 0
- Rating
- 0
P
Printables
Gridfinity bins for Teltonika RUTX11, or similar, antennas (WiFi + Mobile)
Custom Gridfinity bins to store Teltonika RUTX11 router (or similar) antennas horizontally. I needed to organize my Teltonika router antennas in a drawer instead of throwing them loosely in a bin. Made the Mobile version first with…