1 / 2
Tesla model 3 - Aero Wheel Remix - Center Cover and Lug Nut Covers - Spiral and Plain
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Aero Wheel for Tesla for those that want to remove the wheel covers and expose the wheel.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 139
- Makes
- 0
- Views
- 1,357
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of a model that had the Tesla logo on the center cap. Here I am providing two alternative versions: one set with a spiral design on the cap and lug nuts; another set plain flat.
You might want to take the plain flat set and remix with your own design, or monogram!
I printed these on a smoot glass surface using black PETG which came out having a nice shine on the surface.
In my situation I used the following settings:
- Standard quality (0.2 mm layer height)
- First layer
- Build plate 90 degrees
- Extruder 250 degrees
- 200% Flow (this helped close any gaps on the first layer)
- Second layer
- Build plate 90 degrees
- Extruder 230 degrees
- Retraction
- Distance 1 mm
- Speed 25 mm/s
- Top/bottom line - width 1mm
- Wall order - outside first
- Top/Bottom pattern - concentric
- Infill 100%
- Coast enabled
- Comb - All
- Z-Seam - sharpest corner