1 / 2
Tesla model 3 - Aero Wheel Remix - Center Cover and Lug Nut Covers - Spiral and Plain
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Aero Wheel for Tesla for those that want to remove the wheel covers and expose the wheel.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 139
- Wydruki
- 0
- Wyświetlenia
- 1357
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (20)Powiązane
This is a remix of a model that had the Tesla logo on the center cap. Here I am providing two alternative versions: one set with a spiral design on the cap and lug nuts; another set plain flat.
You might want to take the plain flat set and remix with your own design, or monogram!
I printed these on a smoot glass surface using black PETG which came out having a nice shine on the surface.
In my situation I used the following settings:
- Standard quality (0.2 mm layer height)
- First layer
- Build plate 90 degrees
- Extruder 250 degrees
- 200% Flow (this helped close any gaps on the first layer)
- Second layer
- Build plate 90 degrees
- Extruder 230 degrees
- Retraction
- Distance 1 mm
- Speed 25 mm/s
- Top/bottom line - width 1mm
- Wall order - outside first
- Top/Bottom pattern - concentric
- Infill 100%
- Coast enabled
- Comb - All
- Z-Seam - sharpest corner