1 / 3
E3D Hotend Mount for Anycubic Kobra Max/Kobra Plus/Vyper
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Anycubic Kobra Max/Kobra Plus/Vyper – Genuine E3D Hotend Conversion
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 141
- Makes
- 1
- Views
- 1,899
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution
Adapter that allows to put for the genuine E3D hot end on Kobra Max. Doesn't reduce print height (even lower stack than the stock).
Assembly:
- Print clamp L+R halves with 100% infill in PETG or ABS. PLA would probably work just fine too.
- Print drilling guide; any filament; 30%+ infill.
- Drill ONE top rib of E3D radiator with 1/8" or 3mm drill.
- Slide clamp over the strain gauge (black fork).
- Use 2x M3x20 bolts, washers and nuts to secure the radiator.
- Print 5015 fan holder.
- Attach fan holder reusing M3x8 bolts from stock fan cover.
- Attach 5015 fan with 2x M4x20 bolts and nuts.
- Print air deflector in PETG/ABS; insert into fan as shown.
- Print Z stop; attach with stock bolt.
- Connect wires.
- Perform homing, ABL.
- Enjoy!
Parts needed:
- 2x M3x20 bolts + nuts.
- 4x M3 washers.
- 2x: M4x20 bolts + nuts.
- 1x 5015 24v DC fan
- 3x JST PH2.0 2-pin connectors (fans, thermistor)
- 1x JST 2.54mm connector (heater)
https://www.matterhackers.com/store/l/e3d-volcano-hotend-kit/sk/MQE747LJ (E3D Volcano Hotend - 1.75mm Bowden 24v)
https://www.amazon.com/gp/product/B098KXZNY6 (Screws kit)
https://www.amazon.com/gp/product/B07DB7DLMM (Winsinn 5015 24v DC fan)
https://www.amazon.com/gp/product/B09DBHG6NW (JST 2.0mm connectors)
https://www.amazon.com/gp/product/B015Y6JOUG (JST 2.54mm connectors)
Onshape CAD model: