Pinecil or TS100 solder tip stand/box (Fusion360)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.47 – €1.79 net (excluding VAT)
For file: s-Pinecil-tip-case_0.4n_0.2mm_PLA_MK4_1h39m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.63 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 1.65 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Compact box or stand for soldering iron tips.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 60
- Makes
- 0
- Views
- 347
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Small box and stand for soldering tips for Pinecil or TS100.
The case is designed for short tips (88 mm length).
Adjustment for longer tips:
In case use have “normal” (105mm long) ones you can adjust the model in following ways.
- adjust length parameter in fusion (one click edit), add extra 15mm.
or alternatively in Prusaslicer
- Cut the cover in slicer and scale Z axis (+15mm) of top part (one closer to print bed). Make sure you do not scale the part where the small click pimple is.
- It may work to scale the whole cover, because there may be enough clearance on the click thing. This is not tested though.
Design adjustments
- Fusion 360 as well as STEP model is attached. Happy editing :)
Clearances
- lid and base have 0.2mm clearance (0.1mm on each side)
- hole for tips is 6mm (my tips are 5.85mm)
- PLA
- no supports
- oriented as in 3mf project.
How it works:
