F2F - FanToFilter - Connect a Fan to a Filter Cartridge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You have a fan - you have a filter. This fully parameterized OpenSCAD-Project connects both.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 305
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Update 2021/03/17: added support for multiple cartridges, an offset, and support walls in the center of the construction, removed slopes for cap
Print instructions
PLA and PETG worked fine for me, ABS didn't work (to large → warping)
Chose your options
Printer
This projects adapts some properties as wall thickness and heights to your printer properties. Some Informations can be found in the slicer.
- printer_layer_height=0.20;
- printer_wall_thickness=0.86; //see your slicer for a thin wall consisting of two lines
- printer_overhang_angle=45; //for PLA 60 degree might work
Filter Cartdrige
- filter_width=100; //x
- filter_length=150; //y
- filter_height=15; //z
- filter_overlap=5;
- filter_offset_x=0;
- filter_offset_y=-25;
- filter_number_x=2;
- filter_number_y=1;
- filter_number_z=1;
The filter-cartridge is described by a box 100mm x 150mm x 15 mm and an unusable border around the airflow of 5 mm, you may arrange any amount of filter cartridges around and they may have an offset to the center of the fan.
Fan
- fan_type="120"; You may choose from the following options: 220/200/140/120/92/80/70/60/50/40 or define your own fan
- fan_screw="M4"; You may choose from the following options: M2/M2.5/M3/M5/M5/#6 or define your own screw
Construction