1 / 1
F2F - FanToFilter - Connect a Fan to a Filter Cartridge — zdjęcie 1

F2F - FanToFilter - Connect a Fan to a Filter Cartridge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

6,47 € – 7,91 € netto (bez VAT)

Dla pliku: fan2filter_fan120_filter100x150x15_02mm_pla_mk3.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 7,19 € netto (środek widełek).

Masa podana przez autora
69 g
Czas druku podany przez autora
8,2 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

You have a fan - you have a filter. This fully parameterized OpenSCAD-Project connects both.

Ocena
0 / 5
Polubienia
3
Pobrania
26
Wydruki
0
Wyświetlenia
305
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Update 2021/03/17: added support for multiple cartridges, an offset, and support walls in the center of the construction, removed slopes for cap 

 

Print instructions

PLA and PETG worked fine for me, ABS didn't work (to large → warping)

Chose your options

 

Printer


This projects adapts some properties as wall thickness and heights to your printer properties. Some Informations can be found in the slicer. 

  1. printer_layer_height=0.20;
  2. printer_wall_thickness=0.86; //see your slicer for a thin wall consisting of two lines
  3. printer_overhang_angle=45; //for PLA 60 degree might work

Filter Cartdrige

  1. filter_width=100; //x
  2. filter_length=150; //y
  3. filter_height=15; //z
  4. filter_overlap=5;
  5. filter_offset_x=0;
  6. filter_offset_y=-25;
  7. filter_number_x=2;
  8. filter_number_y=1;
  9. filter_number_z=1;

The filter-cartridge is described by a box 100mm x 150mm x 15 mm and an unusable border around the airflow of 5 mm, you may arrange any amount of filter cartridges around and they may have an offset to the center of the fan.

Fan

  1. fan_type="120"; You may choose from the following options: 220/200/140/120/92/80/70/60/50/40 or define your own fan
  2. fan_screw="M4"; You may choose from the following options: M2/M2.5/M3/M5/M5/#6 or define your own screw

Construction

 

Tagi