1 / 2
Spooky Castle - Hueforge Print
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.08mm Filaments Used: PLA Black Matte PLA…
- Rating
- 5 / 5
- Likes
- 52
- Downloads
- 151
- Makes
- 4
- Views
- 805
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.08mm
Filaments Used:
- PLA Black Matte
- PLA Grey
- PLA Coffee
- PLA White
Swap Instructions:
- Black Matte until layer #21 at 0.88mm
- Grey until layer #28 at 1.16mm
- Coffee until layer #35 at 1.44mm
- White for the rest.
Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.
Category: Other