Voron 2.4 & Trident Tophat 35mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Originally Made after the Wish of an User on Discord Available in different Sizes. Adds around 35mm Space in Z direction
- Rating
- 4.818 / 5
- Likes
- 196
- Downloads
- 567
- Makes
- 10
- Views
- 6,287
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
(16.02.2024) Outsourcing the 66mm Version to it's Original repository
(01.02.2024) Added CAD Files and made the 66mm Version to be screwed down (35mm TBD)
→ There were to much reports of the TopHat not sitting tight enough against the foam/frame
(05.10.2023) Reduced the amount of magnets needed and released 66mm Base Model
(04.09.2023) Updated to newer Version slightly incresed thickness, to minimize artifacts
This Tophat grant extra travel for Z so your bowden and possible Umbilical/Can Wires don't hit the top panel and get squeezed.
Right now made for Standard 3mm Panels. If asked, i will try to do for thicker Panels
Disclaimer: This Modell likely needs you to calibrate shrinkage before.
BOM (35mm):
Printed Parts:
- 2 (and 2 mirrored) Panels of each type (look for your desired size)
- 4 Connector Plates
- 4 Cover Plates
- 8 Magnet Inlays
- 8x | Unhammer Nuts
Hardware:
- 20x Heatset Inserts
- 4x | M3x6
- 8x | M3x8
- 4x | 6x3 Round Neodym Magnets (for the Covers)
Magnet Mount reused from: https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/Le0n/Magnetic_Panels_with_Magnet_Inserts He did a really great job.