Voron 2.4 & Trident Tophat 35mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Originally Made after the Wish of an User on Discord Available in different Sizes. Adds around 35mm Space in Z direction
- Ocena
- 4,818 / 5
- Polubienia
- 196
- Pobrania
- 567
- Wydruki
- 10
- Wyświetlenia
- 6287
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
(16.02.2024) Outsourcing the 66mm Version to it's Original repository
(01.02.2024) Added CAD Files and made the 66mm Version to be screwed down (35mm TBD)
→ There were to much reports of the TopHat not sitting tight enough against the foam/frame
(05.10.2023) Reduced the amount of magnets needed and released 66mm Base Model
(04.09.2023) Updated to newer Version slightly incresed thickness, to minimize artifacts
This Tophat grant extra travel for Z so your bowden and possible Umbilical/Can Wires don't hit the top panel and get squeezed.
Right now made for Standard 3mm Panels. If asked, i will try to do for thicker Panels
Disclaimer: This Modell likely needs you to calibrate shrinkage before.
BOM (35mm):
Printed Parts:
- 2 (and 2 mirrored) Panels of each type (look for your desired size)
- 4 Connector Plates
- 4 Cover Plates
- 8 Magnet Inlays
- 8x | Unhammer Nuts
Hardware:
- 20x Heatset Inserts
- 4x | M3x6
- 8x | M3x8
- 4x | 6x3 Round Neodym Magnets (for the Covers)
Magnet Mount reused from: https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/Le0n/Magnetic_Panels_with_Magnet_Inserts He did a really great job.