Framework 13 Laptop Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A laptop stand for the Framework 13 notebook
- Rating
- 5 / 5
- Likes
- 52
- Downloads
- 423
- Makes
- 2
- Views
- 2,871
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Framework 13 Laptop Stand
I wasn't pleased with the existing Notebook Stands, as the Framework 13 has the tendency to move around far too much on those stands. So I made my own design.
The rubber feet on the bottom of the Framework 13 were the ideal starting point, so I integrated them into the design as anker points. Now the Framework 13 Laptop sits nicely on the stand.
Parts to print
This model consists of 5 parts:
- Left Side
- Right Side (Mirror of left side)
- 3x Spacer (print this part 3 times)
Assembly Institutions
- Press the 3 spacers into the holes of on side (Left/Right)
- Align the other side and press it in, spacer by spacer, there should be enough flex to allow for them to go in individually
- Use glue if fit is too loose
The parts come out fairly snug on my Bumbu X1C, so there was no need for glue.
Don't forget to like if you find this model useful,
Cheers!