Graber-i3 BTT SKR2 Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for enclosing the SKR2 board for the original Graber i3 MDF frame
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 220
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This cover requires minimal modification of the frame, it uses the original mounting screws already on the frame. Only a few extra holes have to be added to mount the SKR2 board which is bigger than the Ramps 1.4.
The entire cover can be added without disconnecting any wires except the LCD cable has to be routed through the side opening.
Every port is user accessible and the cover can be easily accessible without removing anything.
A 40mm fan can be added onto the back for cooling.
Also check out my model for the BTT LCD https://www.printables.com/model/559313-btt-tft35-case-rev3