Frosthaven Boss Proxy: The Collector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here's my proxy model for the Frosthaven boss, the Collector!
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 130
- Makes
- 0
- Views
- 430
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here's my proxy model for the Frosthaven boss, the Collector! There's not a huge footprint on this guy, so if you're printing it directly on the bed, I'd recommend putting a support point or two on the “leg blast” so that it doesn't get knocked loose during printing. Other than that, it's a pretty straight-forward print with support needed in the obvious spots.
As always, the .blend file and pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although the support points should work for SLA printers) for this model are available to my patrons at https://patreon.com/VirtuallyJason. If you appreciate my work and have a few dollars to spare each month, please consider joining!