Colorful Clone Trooper Portrait
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hi, you can also use other colors to create a different look. Show me some Makes :)
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 36
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Basic Pink Transmission Distance: 8
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Red
At layer #7 (0.64mm) swap to Orange
At layer #8 (0.72mm) swap to Pink
At layer #11 (0.96mm) swap to Yellow
At layer #17 (1.44mm) swap to Jade White for the rest.