Schwimmbrillen-Band-Clip
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.17 – €0.20 net (excluding VAT)
For file: BEKO Schwimmbrille_0.1mm_PLA_MK3S_15m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.19 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 15 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Clip für das Gummiband einer (BECO) Schwimmbrille.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 47
- Makes
- 1
- Views
- 209
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Leider sind mir im letzten Urlaub beide Clips meiner Schwimmbrille kaputt gegangen. Nun ja, ich hätte mir eine neue Schwimmbrille kaufen können, aber selbst ist der Mann. Der Clip sollte grundsätzlich für alle Gummibänder mit einer Breite von ca. 10 - 11 mm passen.
Print instructions
Printed on
Prusa i3 MK3S
Layer height
0.10 mm
Infill
100%
Konturen
3
Supports
yes
Printed with
Prusament PLA Recycled (ASA and PETG should also work just fine)
Ich habe es mit 50% Druckgeschwindigkeit gedruckt. Je nach Filament tritt ein wenig Stringing auf.