1 / 5
Bachmann CONI Desk Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Desk Mount for Bachmann CONI Powerstrips.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 46
- Makes
- 1
- Views
- 560
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
About
I had two Bachmann CONI powerstrips lying around whose mounts were broken. I also didn't wanted to mount them flush inside the desk, so I designed these mounts which replace the original sidecaps. The L-Clamp takes an M4 Nut and gets fastened by an M4 Screw through the replacement sidecaps.
BOM
- 2x M4 Nut
- 2x M4 Button Head Screw (length depends on your tabletop thickness, i used M4x30mm for my 25mm tabletop)
Printing
The Cover_Mount file has to get printed 1x normal, 1x mirrored.
Everything has been printed in Prusament PETG Galaxy Black. I've printed the Cover_Mount with 3 perimeters and 20% infill. The clamp was printed with 3 perimeters and 100% infill.