1 / 5
Bachmann CONI Desk Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desk Mount for Bachmann CONI Powerstrips.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 560
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
About
I had two Bachmann CONI powerstrips lying around whose mounts were broken. I also didn't wanted to mount them flush inside the desk, so I designed these mounts which replace the original sidecaps. The L-Clamp takes an M4 Nut and gets fastened by an M4 Screw through the replacement sidecaps.
BOM
- 2x M4 Nut
- 2x M4 Button Head Screw (length depends on your tabletop thickness, i used M4x30mm for my 25mm tabletop)
Printing
The Cover_Mount file has to get printed 1x normal, 1x mirrored.
Everything has been printed in Prusament PETG Galaxy Black. I've printed the Cover_Mount with 3 perimeters and 20% infill. The clamp was printed with 3 perimeters and 100% infill.