PiZero Webcam
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.42 – €2.96 net (excluding VAT)
For file: PiCamZero_0.2mm_PETG_MK3SMMU2S_2h52m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.69 excluding VAT (range midpoint).
- Weight reported by the author
- 32 g
- Print time reported by the author
- 2.87 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple Webcam using Raspberry Pi Zero and Show-me Webcam
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 58
- Makes
- 0
- Views
- 774
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
I needed a webcam and had a Raspberry Pi Zero and a couple of camera modules. Using "Show-me Webcam" you can covert a PiZero into a USB webcam.
Hardware
- Raspberry Pi Zero
- ≥64MB SD Card
- ZeroCam
- 1 - M3 x 35mm button head bolt
- 1 - M3 x 10mm button head bolt
- 2 - M3 Nyloc Nut
- 2 - M3 Nylon washers (optional)
- 4 - 3mm x 10mm self tapping screw
- “PiCamZero-Nyloc.stl”
- Glue
Depending on the camera:
- “Wide Angle Cover.stl” If using the FishEye camera
- “Pinhole Cover.stl” If using ZeroCam or ZerCam NOIR
Software
Let me know in the comments if anyone wants a build guide for this, I think it isn't that hard to build but I designed it sooooo LOL
Added the 3MF file where I increased the fill of the 2 stand parts mostly to increase the weight of the parts a little.