1 / 2
EDF Housing for 64mm blades (64 / 64.5 / 65mm internal diamention) — image 1
1 / 2

EDF Housing for 64mm blades (64 / 64.5 / 65mm internal diamention)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

EDF printed because the original one was a little bit too small

Rating
0 / 5
Likes
22
Downloads
263
Makes
0
Views
1,197
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

EDF printed because the original one was a little bit too small

Internal dimension is 65mm instead of 64 to prevent rubbing but I see some space between wall and propeller, so I think it can be lowered about 0.5 and still fit without rubbing but I didn't tested. This dimensions are good enought for me, so I upload the photos of my 65mm and also stl files for 64.5 and 64mm if someone need ultra fine fit.
If You decided to print smaller one please leave an information for others how it works

outer diameter = inner + 4mm (2x 2mm wall)
hooks: 3.5mm x 0.8mm (for best print with 0.4 nozzle)
mounting wholes: 4x 3mm on 8mm radius
(this is my model: https://s.click.aliexpress.com/e/_Evp1SiX )

Used material: PLA Impact - Fiberlogy
Layer height: 0.12 mm
100% infill from walls

Tags