1 / 2
EDF Housing for 64mm blades (64 / 64.5 / 65mm internal diamention) — zdjęcie 1
1 / 2

EDF Housing for 64mm blades (64 / 64.5 / 65mm internal diamention)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

EDF printed because the original one was a little bit too small

Ocena
0 / 5
Polubienia
22
Pobrania
261
Wydruki
0
Wyświetlenia
1184
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

EDF printed because the original one was a little bit too small

Internal dimension is 65mm instead of 64 to prevent rubbing but I see some space between wall and propeller, so I think it can be lowered about 0.5 and still fit without rubbing but I didn't tested. This dimensions are good enought for me, so I upload the photos of my 65mm and also stl files for 64.5 and 64mm if someone need ultra fine fit.
If You decided to print smaller one please leave an information for others how it works

outer diameter = inner + 4mm (2x 2mm wall)
hooks: 3.5mm x 0.8mm (for best print with 0.4 nozzle)
mounting wholes: 4x 3mm on 8mm radius
(this is my model: https://s.click.aliexpress.com/e/_Evp1SiX )

Used material: PLA Impact - Fiberlogy
Layer height: 0.12 mm
100% infill from walls

Tagi